沉水鼓风机安装前的注意事项

沉水鼓风机安装前的注意事项：

1. 首先请检查铭牌上沉水式鼓风机型式、出口口径、额定输出之频率、相
数、电压、电流、压力、风量等，是否和你所需求规格相符合。
2. 请确认在运输途中产品是否损伤。尤其必须注意螺丝及螺帽等有无松动
之情况发生。
3. 关于附件方面，请确认种类、件数有无错误。
4. 请注意沉水式鼓风机必须依标示方向、正确运转。
5. 当你使用沉水式鼓风机时，需要适当容量的电源。因为若是使用了小容量
的电源，便有可能会发生无法启动的情形，所以请您千万注意电源容量。

Matters that should be aware of before installation:
Please check if the specifications （including the type of roots blower, outlet
diameter, nominal output frequency, number of phrases, voltage rating, current
rating, pressure, wind output） appear on the tag match your specifications.
Please check if the product had any damages during transport or shipping
（especially if there is any loosening of the screws, bolts and nuts）.
Regarding the accessories, please check if the types and numbers of them have
been correctly provided.
Please notice that the submersible blower will have to operate in the direction
illustrated.
Please note sufficient power must be supplied for the submersible blower,
otherwise the blower may not start. Make sure the power supply is sufficient.